Search
START TYPING AND PRESS ENTER TO SEARCH
Faster, Stronger, Higher
ÜÇGE DRS Warehouse Shelf Systems Inc.; It is one of the few companies in the world in its sector with its specially designed heavy and light load warehouse racking systems and smart storage solutions offered to logistics, retail, industry and many other sectors. ÜÇGE DRS, which serves with the understanding of Innovative Warehouse Solutions and has a leading structure with the 'firsts' it has created in the sector, carries out successful projects under the roof of its R&D Center. Customer-specific solutions
producing ÜÇGE DRS; It has an annual production capacity of approximately 5,000 tons in sleeper production and 60,000 tons in Highrack Foot production.
ÜÇGE DRS, which exports 50 percent of its production, offers solutions in every point of Turkey and in 77 countries of the world with its advanced technology production lines to meet the increasing demands, and internationally accepted products in the quality-benefit-price balance.
Garment Rail Storage Systems6
At a certain level of automation of pallets; sensitive, accurate and fast receipt, storage and
It is a combination of hardware and controls that involve finding and fetching it.
AS/RS Pallet automation is the combination of hardware and control systems including delicate, accurate and
quick retrieval, storage and transfer of the pallets.
* PAŞA is a registered trademark of ÜÇGE DRS Warehouse Shelf Systems. / PASHA is the registered trademark of ÜÇGE DRS Warehouse Racking System.78
High altitude, where entry-exit speeds are very high
In pallet racking systems, robot stackers (stackercraine) are preferred. up to 40 meters high
storage is possible.
Access capacity is high. In the storage area
no operator is required. Preparation of orders
duration is reduced. Their speed is at the level of 150 m/min.
According to the required load capacity and pallet entry-exit speed in the stock area; warehouse design and use
The speed of the fully automatic stacker robot can be easily adapted. The entire warehouse is through a warehouse management software
is run. Robot stackers, stacking and stacking products in accordance with the orders received from the warehouse management software.
It performs the unloading with parallel movements. This application, which increases efficiency, also saves energy.
also provides.
All kinds of shapes and shapes of products through special transport trays; precision accurate and with the best use of volume
It is a combination of hardware and software that stacks quickly and brings it in front of the user when needed.
P
With no shape limit, all kinds of products, semi-finished products and raw materials can be used in the best possible way with specially designed trays.
They are intelligent storage systems that stack and manage fully automatically. At least in low-ceilinged areas
In addition to being able to be used with loss and with the highest flexibility, it can be used easily at heights up to 40 meters.
It is an ideal smart storage system especially for warehouses that feed production next to production areas.
By carrying the desired product to the desired station instantly thanks to the algorithms specially designed for customer needs.
In the working system, special trays with varying capacity and dimensions are used for customer needs. These trays
It gives a flexible structure by minimizing the shape limits of the products to be stocked.
Boxed-boxed-packaged etc. at a certain level of automation of the part-based products in the location; precise, accurate and
It is a combination of hardware and controls that includes rapid retrieval, storage, and retrieval.
PAŞA – AUTOMATIC BOXED STORAGE SHELF SYSTEM
High-altitude boxes, parcels, packages, etc., where entry-exit speeds are very high. In warehouse racking systems for products, robot stackers (stacker-craine) are preferred. It can be stored up to 40 meters high. Access capacity is high. No operator is needed. Order preparation time is reduced. The speed of box stacking robots can be increased up to 300 m/min. Working in accordance with the principle of conveying the product from the warehouse to the operator in the boxed storage areas.
This system carries the box from which the product will be taken or the box to which the product will be added, in front of the operator. Continuing the process, it takes the boxes back to their place by performing the operation in reverse. The system is fully automated, permanent inventory control, maximum efficiency from time and space and stored boxes.
facilitates access.
Stacker–Cranes are preferred in high racking warehouse systems which are used for boxes, packages or parcels, and where loading and unloading is very fast.
This system, which is a fully automatic storage type, provides high efficiency space utilization at high speed. These systems, created at a high level of automation, provide fast and safe pallet flow in three axes.
With the elevators integrated into the system, pallet transfer between floors is carried out quickly, fully automatically. horizontal
In both directions, product flow is ensured with high precision with Transcar and Ultracap tools.
On a mobile chassis that allows to increase the capacity of the warehouse without losing direct access to each pallet.
It is a kind of back-to-back storage system that is installed and can move in the direction of the corridor in blocks.
* MOBIPAL ÜÇGE is a registered trademark of DRS Warehouse Racking Systems. / MOBIPAL is the registered trademark of UCGE DRS Warehouse Racking System.1920
Unlike a back-to-back storage system, a single aisle space instead of the aisles required to access the racks
has. From which shelf the product will be taken, a command is sent to the system and the shelves move on the rails.
By doing this, a corridor is created in front of the shelf where that product is located.
MOBİPAL Hareketli Depo Raf Sistemleri; ihtiyaç olan koridor boşluğunu %90 oranında azaltır ve otomatik
manageable. In the system where FIFO and LIFO can be applied – can work up to 25 0C and have direct access to all shelves
is provided. It also reduces operational costs with energy savings by reducing the distance traveled by the forklift.
While solutions can be produced according to customer needs, it can also be built in a new or existing warehouse area,
Existing modules can be added later.21
It allows 80-90 percent more product storage. Minimum space - maximum storage
It is preferred mostly in cold storages as it creates the opportunity for
As with all solutions of ÜÇGE DRS Warehouse Racking Systems; Security is also prioritized in the Mobipal system. There are many different security measures in the system.22 This system, which is a fully automatic storage type, provides high-speed, high-efficiency space usage. These systems, created at a high level of automation, provide fast and safe pallet flow in three axes. AUTOPAL
SHUTTLE RACK SYSTEM
This is a system which allows for stocking different products in different lines, decreases the movement time
of the products stacked in the same line, and which can make delicate loading and unloading. Thanks to the moment
electrical mover which is called shuttle, products on the pallets can easily be loaded and unloaded to/from
rack channels.
AUTOPAL AUTOMATIC
SHUTTLE RACKING SYSTEM
* AUTOPAL ÜÇGE is a registered trademark of DRS Warehouse Racking Systems. / AUTOPAL is the registered trademark of TRIANGLE DRS Warehouse Racking System.23
The shuttle is left in the channels for loading or unloading with the help of forklift. With a remote control that can control all its movements
is directed. It moves on the rail in accordance with the loading and unloading orders from the remote control. Earthquake thanks to the cage construction
The shuttle system warehouses, where a suitable static structure is obtained for the regions, is especially suitable for cold and frozen warehouses at low temperatures. Its idle speed is 60
ÜÇGE DRS Shuttle, which has a speed of 45 m/min when full at m/min, also shortens the working time in cold stores and increases the ease of use of the warehouse.
The shuttle is left on the canals for loading and unloading with the help of the forklift. The shuttle is controlled by a remote controller which can control all
kinds of movements. The shuttle moves on the rails according to the loading and unloading command received from the remote controller.
The shuttle system warehouses provide a static structure for the earthquake zones, and are especially suitable for cold and freezer warehouses. UCGE DRS
Shuttle/Shuttle of which speed with and without load is respectively 60m/min. and 45m/min., decreases the working
time in cold warehouses and increases the easy use of the warehouse.24
Standard Equipment
Lithium Battery
Lithium Battery Charging Station
Remote control
Remote Control Charger
User guide
Wooden Crate
Standard Functions
Automatic Pallet Take (Locating)
Automatic Pallet Fetch (Pallet Retrieval)
Automatic Continuous Pallet Fetch
Pallet gap adjustment between 40 mm and 150 mm
AUTOPAL® manual control
4pcs with one remote control. AUTOPAL®
ability to operate
Standard equipment
battery on board
lithium battery charging station
remote controller
remote controller battery charger
User manuals
Wooden box as packaging
Standard Functions
loading
unloading
Continuous unloading
Distance between pallets 40 mm up to 150 mm
AUTOPAL® manual mode
Remote controller able to manage up to 4 AUTOPAL®
Options and Integrations
Transport
Commissioning and Training
Spare parts
Autoservice – Maintenance Trolley
Protection system against liquid dripping from pallets
Cold / Frozen Warehouse integration +4°C to -30 °C(SAT…BZ)
Optional Functions
FIFO Pallet Editing – “from the back”
FIFO Pallet Editing – “from the front”
Collision avoidance (Possibility of 2 AutoPal® runs on the same channel
in case of)
Pallet Counting for Inventory
Multiple Palette: Ability to use different depths of palette in the same eye
feature
Automatic "Continuous Pallet" without waiting for the pallet to be received.
fetch” feature
Optional and integrations
transport
Installation and training
spare parts
Autoservice – maintenance manual buggy
Protection against liquid dropping from pallet
Cold store machine setup from +4°C up to -30°C (SAT. … BZ.)
Optional functions
Pallets rearrange “compacting push”
Pallets rearrange “compacting pull”
Uncollision between AUTOPAL® in the same channel
Stock list: counting pallets
Multipallet: different depth pallets management in the same
channel
Continuous unloading “plus”25
PAL. 0812. ST. LTH 1500 800 1200 878 174 955 45 180 843 300 270
PAL. 1012. ST. LTH 1500 1000 1200 1078 174 955 45 200 843 300 270
PAL. 1212. ST. LTH 1500 1200 1200 1298 174 955 45 220 843 300 270
PAL. 4840.ST. LTH 1500 1220 1016 1298 174 828 45 210 716 300 270
PAL. 4048.ST. LTH 1500 1016 1220 1078 174 955 45 200 843 300 270
Features
Usage Temperature ST: +5°C to +45°C
BZ: +4°C to -30°C
Colors Chassis RAL 6032
Platform RAL 7035
Shuttle Performance
Speed under load ~ 30-33 m/min
No Load Speed ~ 63-66 m/min
Working Time 10-12-16 hours
engines
Travel Motor 700 W
Lift Motor 400 W
Battery
Type Lithium – Ion MNC
Voltage 24V
Capacity 53 Ah
Weight ~ 13 Kg
Charging Station Values EU 240/50 Vac/HZ
US 115/60 Vac/Hz
20 °C sıcaklıkta %80 şarj süresi 3 h
20 °C sıcaklıkta %100 şarj süresi 5,5 h
Battery Life min. 900 charges
Number of batteries on the device 1
Remote control
Type Radiofrequency
Display LCD 16 x 2
Protection IP65
Power Battery
Battery Charge 500 mAh – 4.8 V
During communication Max. expenditure 55 mA
Without communication Max. spending 50 mA
Standby Function 3 min. with duration
not used
otherwise it will wait
At 20°C and with proper use, the battery life is on standby for 10 hours continuously
1300 hours
Technicial Specifications
PAL. 0812. ST. LTH 1500 800 1200 878 174 955 45 180 843 300 270
PAL. 1012. ST. LTH 1500 1000 1200 1078 174 955 45 200 843 300 270
PAL. 1212. ST. LTH 1500 1200 1200 1298 174 955 45 220 843 300 270
PAL. 4840.ST. LTH 1500 1220 1016 1298 174 828 45 210 716 300 270
PAL. 4048.ST. LTH 1500 1016 1220 1078 174 955 45 200 843 300 270
Load
(max. kg)
Depth
(pallet mm)
wide
(pallet mm)
A
mm
B
mm
C
mm
stroke
mm
weight
kg
D
mm
TO
min. mm
F
min. mm
Models and Dimensions
Shuttle Performances
Speed with Load On Board ~ 30-33 m/min
Speed without Load On Board ~ 63-66 m/min
Working Range 10-12-16h
Features
Working Temperature ST: from +5°C up to +45°C
BZ: from +4°C up to -30°C
Color chassis RAL 6032
ID RAL 7035
motors
Traveling Power Motor 700 W
Lifting Power Motor 400 W
battery
Type Lithium – Ion MNC
Voltage 24V
Capacity 53 Ah
Weight ~ 13 Kg
Charging Station Power EU 240/50 Vac/HZ
US 115/60 Vac/Hz
Charging Time at 20 °C for 80% level 3 h
Charging Time at 20 °C for 100% level 5.5 h
Battery Life with Correct Use min. 900 charges
Battery Quantity on Board 1
Remote Controller
Type Radio-frequency
Display LCD 16 x 2
Protection IP65
Power Battery
Charging Battery 500mAh – 4.8V
Max. Consumption During Transmission 55 mA
Max. Consumption During Receiving 50 mA
Stand-by Function Stand-by mode active
after 3 min. of not use
Battery life (at 20°C) with Correct Use continuous 10 h
stand-by 1300 h
Technical Information
Load
(max.)
Depth
(palette
mm)
Width
(pallet mm)
A
mm
B
mm
C
mm
stroke
mm
Weight
kg
D
mm
TO
mm
F
mm
Models and Dimensions
Model26
It can be used to stack pallets and packaged products of any size and can be attached directly to each product independently.
It is an easy-to-apply and economical warehouse rack system that makes access possible.
BACK TO BACK
WAREHOUSE RACKING SYSTEMS
It's an easily applicable and economical warehouse racking system which can be used to stack pallet and
packaged products of any size, and which enables to access every product directly and independently. .
BACK TO BACK
RACKING SYSTEMS27
It can be installed for any suitable height inside the building. Very easy to mount on vertical prime movers
Different storage possibilities can be created by changing the horizontal carriers (traverses) at any time according to the need.
Installation for every height in the building is possible. Different storage types can be created by installing beam
to the vertical carriers, thus getting the possibility to rebuild the racking system whenever required.
It has a wide variety according to the product type and weight to be stocked; with vertical support legs, horizontal carrier traverses
other complementary accessories are determined. A layout plan is made depending on the truck to be used.
The suitable ones among a wide range of vertical carrier frames, vertical carrier beam and other complementary
accessories are determined according to the type and weight of the product to be stored. The layout is made
in line with the forklift to be used.28
Maximum use in minimum space with the use of narrow space forklifts in high warehouses as a high-altitude racking system.
system for storage.
NARROW AID
WAREHOUSE RACKING SYSTEMS
It's a system targeting maximum storage in minimum area with the use of narrow aisle forklifts in high
warehouses as a high rack system.
HR NARROW
AISLE SYSTEMS29
Since the aisle working range of the stacker is less than other systems, pallet warehouse space capacity
it should be more. In reaching the products, the operator moves up with the stacking device and takes the product.
Stacking with the help of developing technologies and to create higher loading/unloading volume
devices are used at high speeds. Therefore, the smooth movement of the machine along the corridor
There are guide rails on the floor so that the
As the free-space between the racking systems is limited compared to other systems, pallet warehouse area is
much more. The operator moves up with the crane to access the products.
In order to create a larger volume of loading/unloading with the help of advanced technologies, stacker cranes
are used at high speeds. Hence there are guide rails on the ground in order for the crane to move through the
aisle properly.30
It is a system of stacking products of the same size and content one after the other as blocks in the channel. Product circulation is low,
çeşitliliğin az olduğu işletmelerde tercih edilir. Depolama alanının yaklaşık %85’ini kullanarak verimliliği arttırır.
ACCESSIBLE
WAREHOUSE RACKING SYSTEMS
It's a stacking system in which products of the same size and content are placed in the canals one after
another. It's preferred in warehouses in which product circulation is low and product range is low. increases
productivity by using approximately 85% of the storage space.
DRIVE-IN
(FILO)31
Ürün sirkülasyonu düşük, çeşitliliğin az olduğu işletmelerde tercih edilir. Depolama alanının yaklaşık %85’lik
partition is an example of efficient storage that can be used.
Maximum use of space, thanks to a single loading zone, as no space is left between the units.
level. In earthquake zones, it is important to choose high-rack foot sections very carefully.
It's preferred in warehouses in which product circulation is low and product range is low. It's an example of an
efficient warehouse system in which 85% of the storage area can be used.
Area use is at maximum level since there is no space between the units and there is only one loading area.
It is important to choose high-rack frame sections in earthquake zones. High-rack frame sections should be
chosen coutiously in earthquake zones.32
The curtain wall warehouse application, also known as the 'Shell System', can be created with any type of warehouse shelf system.
It is a more efficient and economical warehouse option, especially in high warehouse preferences.
CURTAINWALL
WAREHOUSE RACKING SYSTEMS
Also known as “The Cad System”, the silo racking warehouses can be created with every kind of warehouse
racking system. It's a more efficient and economical warehouse option especially if you have a high warehouse.
SILO / CLAD
RACKING SYSTEMS33
Curtain wall warehouses; only warehouse
In case of a purpose built structure requirement,
warehouse without any building investment
design the rack system as if it were a single carrier
by façade purlin on the shelf system,
facade panel, roof truss, roof purlin and roof
obtained by mounting the panels.
While this system meets the racking needs,
roof and exterior needs for
it eliminates. In this way, fast and
It is an economical solution.
In the dressing shelf system, the shelf legs are one at a time.
acts as a column. Hence this
columns required for the system building and
in order to avoid the field losses arising from the beams.
passes.
Curtain wall warehouse racking system disassembled
due to its structure, the warehouse
to move somewhere or where
expansion/contraction
compared to other building types.
it is advantageous.
Silo racking warehouses can be installed without any
construction costs. There is only a need of the ground
concrete. All the rest parts will be finished by the rack
system. With this system you can organize the needed
racks for your warehouse and also the columns for the
celling Because of the easy installation and less parts its
fast and an economical solution.
The used frames for the rack an economical system
can also be used like columns. because of this
advantage you can use the complete area for the
warehouse without losing space for columns.
Thanks to its disassembled structure, the transfer of
the warehouse to another location or extending/
contracting of the warehouse on the present
location provides advantages compared to other
building structures.34
In warehouses with suitable roof heights, in order to make maximum use of the height, the warehouse or work area
They are walkways or platforms that are loaded/collecting with human power, aimed at increasing
MESAINE (FLOOR) PLATFORM
WAREHOUSE RACKING SYSTEMS
These are the walk ways or platforms on which manual loading/unloading is performed in order to make best
use of height and increase the working space at high warehouses.
MEZZANINE PLATFORM
RACKING SYSTEMS35
Since heights are used maximum in the area,
maximum storage volume can be achieved. product qty
frequently used in consumable product warehouses, where
preferable.
Walking platforms created between the shelves
as can be done with the shelf independent carrier
It is also possible with the platform shelf application installed with feet.
can be created.
Walking areas and platforms on the floors,
plywood, wire grid,
mdf, chipboard, sheet metal etc. covered with material preferences.
Since the heights in the area are used with
maximum capacity, maximum storage is
possible in the system. It's frequently preferred in
warehouses having wide range of consumption
products.
You can install this system in two ways. in the
first method you can install walk ways between
the existing racking systems. In the second way
you can install a new racking system with carrier
frames on your existing platforms.
At the project phase, the walk ways and the
platform surfaces may be covered with plywood,
wire grill, MDF, chipboard, metal etc. according to
to the need.36
Mounted on carrier column for storing long and bulky products (pipe, profile, wood and plate type)
It is a warehouse racking system created with cantilever arms.
CONSOLE
WAREHOUSE RACKING SYSTEMS
It's the warehouse racking system which is created with brackets installed over carrier uprights for the storage
of long and bulky products such as pipes, profiles and plates.
CANTILEVER
RACKING SYSTEMS37
Products of different weights and sizes can be stored side by side, at the desired length, without interruption. in the warehouse
It can be applied as one-way and two-way depending on the location.
It is a very simple and durable system. Depending on the function expected from the established warehouse, it can be used unidirectionally or bidirectionally.
applicable.
The cross-section of the carrier columns and cantilever arms to be used in the system according to the size and weight of the products to be stacked
properties are variable. Depending on the stacker to be used and the height of the warehouse, the height of the system and
The distance between the consoles can be adjusted.
The products of different weight and size can
be stored side by side and at the required length.
The system can be assembled to work in single or
double direction.
It's a very easy and durable system as it can
be. It can be used in single or double direction
according to the function expected from the
warehouse installed.
Section features of the uprights and brackets to
be used are variable according to the size and
weight of the products to be stacked. the space
between the height of the system and brackets
can be adjusted in line with the stacker and the
height of the warehouse.38
Pallet products of the same size and content loaded into the channels where the roll cassettes with a slight slope are placed,
It flows in a controlled way from the inlet direction to the exit direction with the effect of gravity thanks to the feature of the rolls.
It is a warehouse racking system.
PALLET DYNAMIC
WAREHOUSE RACKING SYSTEMS
In this racking system pallet products of the same size and content are loaded in the canals in which roller
cassettes having a light slope are placed. These products flow from the loading point to the unloading point
under the effect of gravity in a controlled manner.
PALLET DYNAMIC
STORAGE SYSTEMS39
The product placed first in the channel flows forward and this
In this way, 'first in, first out'. Duration
for just-in-time use of essential products,
It gives fast and accurate results.
Pallet placed from the entrance side of the system
products are placed on roll cassettes at certain distances.
provided by the placed brake rollers
safe to the end of the channel thanks to the controlled speed
somehow it advances and thanks to the stopper at the end
complete its movement and by the operator
They wait to gather.
The first product loaded on the canal slide down
to front and the product that loaded first always
unload first. It is useful for time based products
and give fast, right results.
The pallet products received from the loading
point of the system moves to the end of the
canal in a controlled manner thanks to the
controlled speed provided by the brake rollers
placed on the roller cassettes at certain intervals.
Then they stop thanks to the stopper at the end
and become ready to be unloaded.40
It is based on the principle of sliding packages, parcels, boxes and similar products over mini rollers placed with a slight inclination.
relies on. It is loaded in one direction and discharged in the opposite direction and operates with zero energy according to the law of gravity.
is the storage system.
BOX DYNAMIC
WAREHOUSE RACKING SYSTEMS
In this system such products as packages, parcels and boxes are slide over mini rollers placed with a light slope.
Products are loaded at one point, and unloaded from the reverse point. And it operates with gravity and zero
energy.
BOX DYNAMIC
STORAGE SYSTEMS41
This system, which works on the first-in, first-out (FIFO) principle, is mostly used in order preparation applications.
preferable.
This system, which
operates with FIFO
(First in first out)
principle, is preferred
to prepare more
orders at enterprises.42
In projects where deep storage will be made, consisting of two or more pallets and having medium cycles.
It is a storage system that is ideal for saving space in warehouses. Since it is a one-way loading/unloading, the first
After the pallet is placed, the first pallet on the rolls of the new pallet loaded on the forklift with the pushing power of the forklift
Storage is done by pushing backwards.
PUSH BACK
WAREHOUSE RACKING SYSTEMS
It's a storage system ideal for saving space in warehouses consisting of two or more pallets and having a
medium cycle. Since there is a single direction loading/unloading, first in last out (FILO), and after the first pallet
is loaded the new pallet is loaded by being pushed backwards over the rolls.
PUSH BACK ROLLER
RACKING SYSTEMS43
In this system, which is another application of back-to-back warehouse racking systems, 2 pallet depths are loaded one after the other.
is done. In this way, more storage capacity is provided in the same space using fewer aisles. system double
Since there is a depth, the pallet in the rear area is reached by the telescopic carrier of the stacker fork.
DOUBLE DEPTH
WAREHOUSE RACKING SYSTEMS
In this system, which is a different practice of back-to-back storing systems, loading at a depth of successive
2 pallets are possible. Hence fewer aisles are used, and storage capacity is increased. As the system is doubledepth, the pallet positioned in the rear section can be accessed with the telescopic carrier of the crane fork.
DOUBLE DEEP
RACKING SYSTEMS44
It is a system developed for the storage of hanging products. The 'Mezzanine System', which we define as a multi-storey system
It can be used by adapting to warehouses.
HANGER
WAREHOUSE RACKING SYSTEMS
It's a system which is designed for the storage of the goods that can be hanged. They can be used by being
adjusted to the 'Mezzanine System' warehouses that is known as layered systems.
GARMENT RAIL
STORAGE SYSTEMS45
Retail outlets, on time,
preference for undamaged and complete shipments
is done. Due to its manual nature,
More economical than automatic storage
stands out as an option.
It is preferred at the retail sale areas in order
to provide on time, non-damaged and
perfect shipment. As a result of its manual
structure, it's a much more economical
option compared to automatic storage.46
Important chains in world retail prefer ÜÇGE DRS solutions. developed for each product and
Hundreds of designs and alternatives that increase sales by highlighting that product are remarkable.
CONSTRUCTION MARKET
SHELF SYSTEMS
The most important chains in the world retail business prefer ÜÇGE DRS solutions. Hundreds of designs and
alternatives which are developed for each product and therefore increases the sale of that product by featuring
it is remarkable.
DIY
STORES47
Innovative approaches in display and stock, from production
Total taken into account at every stage up to assembly
It is carried out with the philosophy of Quality Management.
Innovative approaches in display and stocking
are realized with the philosophy of Total
Quality Management which is applied in every
phase from production to assembly.48
Thanks to its modular structure, it is an aesthetic and practical shelf system that can be used in all storage applications. Middle
It is primarily preferred in warehouses and archive warehouses where light and light loads are stacked manually.
M60 LIGHT LOAD
WAREHOUSE RACKING SYSTEMS
It's an aesthetical and practical racking system which can be used in all storage types as a consequence of its
modular structure. It's primarily preferred to be used in the warehouses where middle and light duty loads are
stacked manually, and in archive warehouses.
M60 LIGHT DUTY
STORAGE SYSTEMS49
Thanks to the special design of the carrier leg, M60 Storage Rack
The system is preferred in many areas. a floor
Parcels, boxes, fabrics,
bag etc. Suitable for many products. textiles, pharmaceuticals,
stationery, archive, spare parts, retail and many
used in the industry.
As a result of it's specially designed frame, M60
Warehouse Racking System is preferred in many
sectors; it is convenient for almost anything (package/
parcel, box, fabric etc.) that needs to be storaged
on the ground, therefore it is used in wide variety
of industry sectors including textile, pharmaceutical
industry, archive, spare parts and retail
TR 
EN